Stainless steel tape 12x18n10t, analog AISI 321, thickness 0.25 mm, width from 4 mm to 400 mm
Stainless tape is widely used in industrial human activities. In industries such as engineering, shipbuilding and automotive, as well as in medicine, chemical, food industry and many others. From stainless tape, by stamping, cutting or bending, various parts are made for the further assembly of components and mechanisms, or they are used as an independent finished product, fixing tape, clamps, etc. Buy a stainless tape from us.
Corrosion - proof tape is made on the Russian market according to GOST 4986 - 79 or TU. In our country, the most widely, according to this GOST, stainless
heat - resistant tape brand 12X18H10T. Foreign analog of this brand AISI 321.
Our company also sells stainless steel tape of the following steel grades:
12X15G9ND - analogue of AISI 201,
08X18H10 analog of AISI304,
08X17H13M2 analogue of AISI 316,
08x17T analog of AISI 430
AISI 430 stainless steel tape is 08x17T steel, it is not only an analogue, Russian steel is considered an improved version of AISI 430. The 08x17T grade can also act as a replacement for 12X18H10T and 12X18H9T grades.
AISI Stanadart (American Iron and Steel Institute), which is translated by the American Institute of Steel and Alloys, has developed its own stainless steel naming system. This system is used in the USA and Europe.
austenitic (i. e. heat - resistant) tape tolerates temperatures up to 600 degrees Celsius, and are characterized by increased resistance to corrosion. Because of these properties, stainless tape is used at high temperatures and in areas where it will be highly susceptible to corrosion.
Corrosion - proof tape designation.
Steel grade 12X18H10T is a structural cryogenic chromium - nickel steel with a low titanium content.
12 X - means 12% chromium
18 N - means 18% nickel
10 T - means not more than 1.5% titanium
Stainless tape divided:
- by type of surface treatment
- stainless tape M (soft);
- stainless tape
PN (semi - guaranteed);
- stainless tape N (caked);
- stainless steel tape VN (highly sold).
- by type of surface of the tape, into groups
- by surface quality class
- by production accuracy
- NT (normal);
- PT (increased);
- BT (high);
- by type of edge
- BUT (unedged)
- O (edged).
The soft stainless tape is the most ductile and has the smallest hardness, which makes it most suitable for stamping, and the highly - mated tape is the hardest and less ductile.
To increase the ductility of a stainless tape, it is heated at a temperature of 1050 - 1100 degrees and quenched in water, which increases ductility and decreases hardness. The production of stainless cartered tape is a complex process of heating steel in a laborious thermal operation, resulting in its plastic deformation.
Making stainless tape is a complex process. It begins with mixing, as a percentage of various metals, ends with maintaining established technical conditions, as a result of which the stainless tape acquires certain necessary properties.
Stainless steel tape 12x18n10t, analog AISI 321
|Stainless tape 0.2||from 4mm to 400mm|
|Stainless tape 0.25||from 4mm to 400mm|
|Stainless tape 0.3||from 4mm to 400mm|
|Stainless tape 0.35||from 4mm to 400mm|
|Stainless tape 0.4||from 4mm to 400mm|
|Stainless tape 0.45||from 4mm to 400mm|
|Stainless tape 0.5||from 4mm to 400mm|
|Stainless tape 0.7||from 5mm to 400mm|
|Stainless tape 0.8||from 5mm to 400mm|
Stainless tape is made from 4 mm to 400 mm wide, from 0.05 mm to 2 mm thick, this applies to stainless steel produced in Russia. Imported analogues AISI430, AISI304, AISI321 are usually from 0.3 mm to 2 mm thick. Usually a heat - resistant stainless steel tape is cut from a roll of 1250 mm wide.
Corrosion - proof to buy a tape in LLC Zeus
Our stainless steel tape meets the declared specifications and state standards and has certificates from manufacturers. The cost and terms of cutting stainless steel tape can be clarified with our managers.
A stainless steel tape that ZEVS LLC can cut and supply at a competitive price and high quality cuts can be from 4 to 400 mm wide and 0.25 mm to 2.0 mm thick. Stainless steel tape of different grades of steel, the main ones are AISI 201 (12X15G9ND), AISI 202 (12X17G9AN4), AISI 304 (08X18H9) and others. The lead time depends on the grade of steel and the amount of metal. Corrosion - proof tape, which is supplied by ZEVS LLC, we can send to any region of Russia and countries of the customs union.
- Packing tape
- Packing tool
- Stamping Tapes
- Bandage tapes
- Slings are textile
- Steel rope
- Big bags
- Work clothes
Price: Formed on each batch of goods in stock
Terms of delivery: (FCA, EXW and others as agreed with the customer)
Terms of payment: Prepayment, partial payment, letter of credit